Ford’s 777,241-Vehicle Recall Covers Faulty Park Systems and Loose Fender Flares
A restriction in the hydraulic passages of an automatic transmission can set off an unusual failure sequence: the parking pawl may engage briefly while the vehicle is moving, damaging components that are later needed to keep it stationary. The driver may still select park, but the damaged mechanism may not hold the vehicle without the parking brake.
That potential rollaway condition is behind Ford’s recall of 741,195 Ford and Lincoln trucks and SUVs. A separate recall covers 36,046 Ford Broncos whose exterior fender flares may come loose. The exact populations add up to 777,241 vehicles, although the two campaigns involve unrelated defects and require different repairs.
Transmission defect combines hydraulic, mechanical and software failures
The larger campaign includes the 2021 Ford F-150; 2020-2021 Ford Explorer and Lincoln Aviator; and 2018-2021 Ford Expedition and Lincoln Navigator.
Inside their transmissions, a valve-body separator plate may restrict hydraulic flow to the park valve when the control system commands certain shifts. The reduced flow can cause temporary engagement of the parking pawl, a mechanical part that locks the transmission when the vehicle is placed in park. Engagement while moving can damage the associated parking components.
The safety consequence can appear later. If the damaged components no longer provide sufficient holding force, the vehicle may roll after the driver selects park unless the parking brake is applied. Ford says it knows of 24 property-damage reports, seven physical-injury reports and two emotional-injury reports potentially related to the defect. Those are reported potential associations, not confirmed outcomes for every recalled vehicle.
Ford’s remedy addresses both sides of the failure sequence. Dealers will update the powertrain control module software so the transmission no longer commands the shifts implicated in temporary pawl engagement. Because a software update cannot reverse existing mechanical damage, dealers must also inspect the transmission and replace parking components when necessary.
That combination is important for owners: the software is preventive, while the inspection determines whether the hardware has already been compromised. Reporting on the federal filing said interim letters were expected to begin going to owners on August 3, 2026, with the complete remedy expected to become available in April 2027.
Why secure park engagement is a federal safety concern
Federal rules have addressed the relationship between the driver’s park selection and the vehicle’s physical state for decades. A 1995 federal rulemaking on vehicle key locking and park engagement grew from concern about unattended-vehicle rollaways and required defined key-removal and park-lock behavior. Its compliance language also limited how far a vehicle could move on a specified grade when locked in park.
That rule focused on preventing key removal when a transmission was not properly secured and on stopping occupants from shifting an unattended vehicle out of park. Ford’s current recall concerns a different pathway: internal damage can undermine the transmission’s ability to hold after park has been selected. The shared safety principle is that the indicated gear and the mechanism’s actual holding state must correspond.
Bronco fastener recall starts at supplier tooling
The second campaign covers 36,046 Ford Broncos from model years 2022 through 2026. It is an exterior-component retention problem, not an extension of the transmission defect.
According to the recall documentation, improperly maintained supplier tooling produced incorrectly sized fender attachment holes containing burrs and stray fibers. Those manufacturing defects may prevent the clips holding the fender flares from seating completely. As retention deteriorates, owners may notice gaps, sagging or misalignment. Rattling, clicking or flapping can also precede a flare detaching from the vehicle.
Ford reports 370 warranty claims, 36 field reports and two customer reports related to the Bronco issue. Dealers will install new push-pin fasteners and replace any flares that are already missing.
The repair paths reflect the engineering divide between the campaigns. The Bronco remedy replaces attachment hardware at a visible body interface. The transmission campaign requires a control-software change plus an inspection for hidden mechanical damage and component replacement where that damage has already occurred.
| More aerospace and engineering stories, right in your MSN feed. Follow AMI on MSN |
By Thomas Caldwell — AMI’s senior editor for mechanical and mobility engineering, covering vehicle electronics, systems integration, electrification, chassis systems, propulsion, and safety policy.
