Airbus ACJ TwoTwenty Arrives Empty, Leaves as an $80 Million Jet
The Airbus ACJ TwoTwenty reaches its completion center looking finished from the outside but largely vacant within. The wings, engines, cockpit and airframe are already assembled; the fuselage behind the flight deck is an empty space awaiting the systems, structures and furnishings that will turn it into a 19-passenger corporate jet priced in the low-$80 million range.

For the first 17 aircraft, that transformation is assigned to Comlux at its 157,000-square-foot facility in Indianapolis. The featured aircraft was the second of those 17 completions and was inspected before delivery, at a time when only two ACJ TwoTwenty aircraft were reported to be operating. Comlux’s work spans cabin design, custom-part production, cabinetry, assembly, avionics, final integration and inspection.
The cabin begins as an engineering layout
Before cabinetry or seating can be installed, the customer’s desired interior must be translated into a configuration that works within an aircraft. Passenger zones, galleys, bathrooms, tables and storage all compete for finite floor area while requiring electrical service, lighting, ventilation and secure attachment to the airframe.
The completed aircraft offers a reported 786 square feet of cabin area. Its arrangement includes multiple galleys and bathrooms, a forward seating section and a six-seat main lounge. The lounge seats are reported to be 22 inches wide, compared with the 16-to-18-inch seats cited for traditional business jets. Folding tables, adjustable lighting and electrochromic windows add further interfaces with cabin power and control systems.
Each feature therefore carries work beyond its visible finish. Components must be manufactured accurately, assembled in the intended sequence and integrated without obstructing other aircraft systems. Comlux uses computer numerical control machines to produce precision parts intended to meet aviation standards and regulations. That manufacturing approach is important in a customized cabin, where low-volume pieces still need repeatable dimensions and dependable fit.
Customization still has to function as an aircraft
Cabin completion is not unrestricted interior decorating. Changes and installed equipment must fit within the aircraft’s approved design and applicable certification requirements. The Federal Aviation Administration describes aircraft certification as including design review, compliance methods, ground and flight testing where required, maintenance evaluation, inspection and review of certification data.
For a completion center, this places emphasis on configuration control and systems integration. Avionics and cabin electronics must be incorporated alongside electrical distribution, environmental controls and other installed systems. Final integration checks whether the individually manufactured and installed elements operate together as intended. Inspection then verifies the completed configuration and its documentation before delivery.
The cockpit illustrates the systems foundation that already exists before the cabin is built. It has six screens and sidestick controls, with two displays used primarily for flying. Aircraft automation covers electrical power, fuel, hydraulics, environmental control and anti-ice functions. The private interior is added behind that flight deck without changing the need for disciplined control of interfaces across the aircraft.
An airliner-derived platform sets the scale
The ACJ TwoTwenty measures 114 feet 9 inches long and has a wingspan of 115 feet 1 inch. Two Pratt & Whitney PW1500G engines power the aircraft. Reported performance includes a top speed of 624 mph, a cruise speed near 524 mph and a range of 5,650 nautical miles. That range is presented as sufficient for routes such as Los Angeles to London, London to Tokyo and New York to Istanbul.
The combination of airliner-derived dimensions and a limit of up to 19 passengers explains both the cabin space and the scale of the completion task. The buyer is purchasing more than decorative materials: the price covers a completed aircraft in which bespoke parts, passenger amenities, electronics and core aviation systems have been brought into one inspected configuration. An indicative charter rate of about $13,000 per hour offers another measure of the operating class involved.
The defining production handoff occurs when the apparently complete Airbus arrives in Indianapolis. At that point, the aircraft can fly in form, but it does not yet have the cabin for which its owner is paying. Only after design, precision manufacturing, installation, avionics work, integration and inspection does the empty fuselage become the finished low-$80 million corporate jet.
| More aerospace and engineering stories, right in your MSN feed. Follow AMI on MSN |
By Thomas Caldwell — AMI’s senior editor for mechanical and mobility engineering, covering vehicle electronics, systems integration, electrification, chassis systems, propulsion, and safety policy.
