America Makes Selects 25 Teams to Standardize Metal Additive Supplier Qualification

A repeatable metal additive manufacturing process requires more than a capable machine. Production managers must control the process, document how it is run, train personnel to apply the same requirements and demonstrate that the resulting operation can pass an audit. America Makes is putting those elements at the center of a $10.5 million supplier-qualification effort involving 25 newly selected project teams.

Image Credit to gettyimages.com

The Joint Additive Qualification for Sustainment Supplier Qualification Groups 2 and 3 project, or JAQS-SQ, will establish common training, process-control and audit requirements for manufacturers using laser powder bed fusion and directed energy deposition. America Makes and the National Center for Defense Manufacturing and Machining are administering the program, which is funded by the Office of the Under Secretary of War, Manufacturing Technology Office.

The important distinction is that selection does not mean the 25 teams are already qualified defense-production suppliers. Participants must complete training, integrate the program’s guidance into their manufacturing operations and undergo an audit. That audit will assess their ability to operate as qualified additive manufacturers, including their ability to conduct a performance qualification under requirements defined by the curriculum.

Process control is the proposed qualification route

Wichita State University’s National Institute for Aviation Research will help develop the curriculum. It is intended for production and engineering operations managers the personnel responsible for translating qualification requirements into routine factory controls rather than leaving them as isolated engineering exercises.

Training will cover additive manufacturing qualification principles and implementation of process-control documents. That focus matters because the program is attempting to build a common route from machine operation to auditable production discipline across multiple suppliers and two additive process families. The practical test will be whether different manufacturers can apply the resulting requirements consistently enough to complete the prescribed performance qualification and audit.

Groups 2 and 3 extend an initial cohort of six laser powder bed fusion suppliers. America Makes says the JAQS network now contains 31 suppliers. The expansion also brings directed energy deposition manufacturers into an effort initially centered on laser powder bed fusion, broadening the range of metal additive operations covered by the qualification framework.

The longer-term objective is to move emphasis away from restrictive, part-by-part qualification and toward documented supplier process controls. That is a potentially significant manufacturing change: qualifying a controlled production system can provide a more reusable foundation than treating every component as an entirely separate starting point. However, the project has not yet demonstrated that its training and audits will accelerate approvals in service, nor does the stated framework establish that component-specific requirements will disappear.

A broad industrial test group

The selected teams span aerospace and industrial manufacturers, additive-production specialists, materials companies, machine developers and service providers. Participants include Collins Aerospace, Eaton, GKN Aerospace GTC, Norsk Titanium US, Nikon AM Synergy, Elementum 3D and Seurat Technologies. America Makes had anticipated making as many as 30 awards but selected 25 organizations.

That mix gives the program a test across different positions in the additive manufacturing chain without making the awardee list the principal result. A machine developer, a materials supplier and an aerospace production organization can face different implementation demands, even when working under common qualification principles. The value of standardization will therefore depend on whether the curriculum defines controls that are consistent enough for auditing but applicable across those differing operations.

America Makes Technology Transition Director Ben DiMarco described the expanded network as a coordinated effort to accelerate supplier qualification and increase national manufacturing capability. Those remain intended outcomes rather than measured results. The confirmed work at this stage is the creation of training, integration of process-control guidance, execution of performance qualification and completion of supplier audits.

Awardees are expected to report progress at America Makes Technical Review and Exchange events and other industry meetings during project execution. Those updates should provide the first indication of how uniformly the 31-supplier network can implement the framework and whether common controls can translate two metal additive process families into an auditable defense-production qualification route.

By Edward Collins — Senior editor for AMI’s performance systems and mechanical design coverage, focused on powertrains, drivetrain systems, manufacturing precision, materials, and high-performance engineering.

Leave a Reply