Army Delays Five-Ton Iowa Detonation That Could Send Lead Into Illinois
The Army has delayed the planned destruction of five tons of unstable lead azide at the Iowa Army Ammunition Plant until Monday, November 23. The material is considered too sensitive to move, yet detonating it in place is expected to create a temporary plume containing lead particles that modeling indicates could cross from Iowa into western Illinois.
The operation had been scheduled for two controlled explosions around noon Friday. Acting Secretary of the Army Adam Telle postponed it until Monday, describing that date as the latest practical point before a forecast temperature drop could further destabilize the material. The delay provides more time for public communication, but it does not remove the central engineering tradeoff: reducing the risk of an uncontrolled explosion requires intentionally setting off 68 drums near surrounding communities.
The Environmental Protection Agency issued an emergency permit effective November 13 after determining that the deteriorated explosive presented an imminent threat to human health and the environment. Lead azide is used as an initiating explosive. During long-term storage, this batch recrystallized and became increasingly sensitive to friction and shock.
Why transportation creates the greater immediate risk
Ordinary hazardous-material disposal begins with packaging and transport to a treatment location. Here, movement is the hazard officials are trying to avoid. The EPA said disturbing the containers could produce an unacceptable risk of an unintentional detonation, while the Army concluded that the material could not be handled or moved safely.
That constraint sharply narrows the available choices. Moving the drums would place personnel close to material whose condition has become less predictable. In-place detonation minimizes direct handling and lets the Army select weather conditions, establish a controlled perimeter and warn communities before the operation. It exchanges an acute handling risk for a planned blast and an environmental-release risk that can be modeled and measured.
The drums are to be detonated inside concrete storage structures covered with earth and surrounded by sand-filled barriers. Crews plan to saturate nearby soil and use misting equipment to suppress dust. Those measures are intended to keep more particulate matter within the installation; they cannot eliminate the expected plume. The Army has said the explosions will cause noise, ground vibration and “a dust plume that will contain some lead.”
Forecast maps are not exposure measurements
Army modeling shows where airborne particles could travel and where dust could settle, potentially including Mercer County, Illinois. Wind direction, wind speed and other weather conditions can move or reshape that footprint. The Army had planned to update its forecast six hours before the explosions and hourly until they occurred, a process that will now need to follow the revised Monday schedule.
The maps identify possible affected areas, not confirmed contamination or an individual resident’s likely dose. The Army says modeled airborne lead concentrations would remain below the EPA threshold requiring protective action and expects the plume to remain airborne for no more than an hour, depending on wind. Sampling is still needed to determine how much lead leaves the plant boundary, where it settles and at what concentrations.
That gap between a forecast and measured deposition explains the different public precautions. Residents closest to Middletown City Park and Butterfly Park had been asked to leave between 8 a.m. and 2 p.m., primarily because blast shockwaves could damage windows. An Armed Forces Reserve Center was designated to accommodate affected families and pets.
Across the wider modeled plume area, the Army advised people to remain indoors, close doors and windows, avoid unnecessary travel and set heating and cooling equipment to recirculate indoor air where possible. Illinois health officials recommended remaining inside for 24 to 48 hours after the explosions, considerably longer than the Army’s estimated airborne-plume period.
Monitoring will determine the operation’s wider consequence
The emergency permit requires sampling and monitoring before, during and after the detonation, followed by cleanup where necessary and reporting to the EPA. This oversight matters because airborne concentration is only one part of the exposure question. Lead-bearing particles that settle on outdoor surfaces, soil or play equipment can remain after the visible plume has dispersed.
Illinois officials have asked for comprehensive air, soil and surface-dust testing and public release of the results. The Illinois EPA said it had not received details about the scope or methods of planned air monitoring and had not been notified by EPA Region 7. Those unresolved coordination questions extend beyond the plant because, as Illinois EPA Director James Jennings put it, “Air pollution does not respect state lines.”
Monday’s operation will therefore have two tests. The first is whether the Army can destroy the unstable explosive without an accidental event. The second begins after the blast, when measurements must show where the lead went and whether cleanup is required beyond the installation.
| More aerospace and engineering stories, right in your MSN feed. Follow AMI on MSN |
By David Whitaker — Associate editor for AMI’s aerospace and drone systems desk, translating flight systems, aircraft programs, spaceflight, and UAV developments into accessible technical stories.
